1、 Put it away. No hanging placement: It shall be placed in a place not easily accessible to children to prevent children from accidentally falling on the car model, which will not only damage the car model, but also possibly cause harm to children. Building model customization High temperature irradiation is prohibited: do not directly expose to the sun or light for a long time, which may cause aging, deformation and wrinkling of painted wheels and plastic parts, and the rubber tires are easy to be oxidized, resulting in thermal dissolution. Prevent wet environment: If the zinc alloy car model is placed in a wet place for a long time, the car body alloy will be easy to be oxidized, black spots, and blisters on the paint surface. Therefore, it should be kept as dry as possible in the storage environment. Tire mold placement: The tire components produced by different automobile model manufacturers are different. For heavy car models that need to be placed for a long time, it is recommended to pad the wheels with plexiglass or small wood blocks to prevent the tires from deforming or sticking to the base. Packaging box: This not only affects the ornamental value of the model, but more importantly, it will directly affect the value of the collected car models and the resale price. 2、 Appreciate techniques. Don't use too much force: The simulated car model is composed of multiple parts, some of which are especially small, so it is necessary to prevent falling, shockproof, and pressure. Be careful not to use too much force when using your hands. Causes damage to parts. Special door opener: If the door opener cannot be found at the moment, it can be replaced by a postcard or a plastic sheet with a certain hardness. Because the door is opened by hand for a long time, the body paint is seriously damaged, and even the door may be damaged. 3、 Protection and maintenance. Dedusting: regularly use soft brush, plastering, hair dryer and other tools to clean up the dust on the surface of the car model. Painting and waxing: Aluminum alloy car models are generally put for two to three months and need to be wiped with wax or Brilliant beads to prevent rust. However, it should be noted that each waxing should be fine and even. Waxy automobile die seams can be easily embedded in them for customization of industrial equipment models. | 
